Tuesday, 01st August, 1967 Same as Present Address Indian Male Ph.D. Professor, Applied Mechanics & Head, Health care Science & Technology Indian Institute of Engineering Science and Technology, Shibpur
Finite Element Methods
Roy Chowdhury, A. and Pal, S., (2000) “A 3D FEM Analysis of Single and Multiple screw root Dental Implant fixed in Mandible”, Critical Review TM of Biomedical Engineering, Vol. 48. 405-410.
Roy Chowdhury, A. and Pal, S., (2000) “Stress Analysis of an Artificial Temporal Mandibular joint”, Critical ReviewTM of Biomedical Engineering, Vol. 49. 411-420.
Roy Chowdhury, A., Pal, S. and Saha, S. (2001), “Finite Element Analysis of an Artificial Temporal Mandibular joint” Automedica, Vol. 20, pp. 283-295.
Majumder, S., Roy Chowdhury, A. and Pal, S. (2004), “Dynamic response of the pelvis under side impact load – a three-dimensional finite element approach.” International Journal of Crashworthiness, Vol. 9 (1), pp. 89-103.
Majumder S., Roychowdhury A. and Pal S., (2005)“Biomechanical analysis of human pelvis under musculo-skeletal load using 3D finite element method.” International Journal of Applied Mechanics and Engineering, 10, 647-665.
Majumder S., Roychowdhury A. and Pal S., (2005) “An algorithm to calculate the components of all muscle forces during each phases of gait cycle, for the pelvic-femur complex. Journal of Mechanics in Medicine and Biology”, 5, 539-548.
Nandi N, Dutta S. C, Roychowdhury A. , (2005) “Analysis of shear failure of earthen dam” Dam Engineering, Vol XV Issue 4 pp 252-282
Majumder S., Roychowdhury A. and Pal S., ‘Simulation of hip fracture in sideways fall using a 3D finite element model of pelvis-femur-soft tissue complex with simplified representation of whole body. Medical Engineering and Physics Vol 29 (10) pp 1167–1178
Kaiser M.S., Datta S., Roychowdhury A. and Banerjee M.K., Age hardening behaviour of wrought Al-Mg-Sc alloy, Materials & Manufacturing Processes, Taylor & Francis Vol13 (2), Pg- 29-41
Roy Chowdhury, A. Pal, S., Gupta, S., and PEC Vidyasagar)(2004), “Wear Studies Of Frequently Used Material for Implant Designing”, Trends in Biomaterials & Artificial Organs, Vol. 17 (2), pp. 130-134.
Majumder, S., Roy Chowdhury, A. and Pal, S. (2004), “Variations of stress in pelvic bone during normal working, considering all active muscles.” Trends in Biomaterials & Artificial Organs, Vol. 18 (2), pp. 48-53.
Sarkar, S., Majumder, S. and Roy Chowdhury, A. (2004), “Response of human head under static & dynamic load using finite element method.” Trends in Biomaterials & Artificial Organs, Vol. 17 (2), pp. 130-134.
Sahoo A,., Ghosh A. Roy Chowdhury A., (2005) Stress analysis of cracked and fractured femur with fixing plate using finite element method. Journal of the Institute of Engineers (India), 86, 24-29.
M.S. Kaiser, S. Datta, A. Roychowdhury and M.K. Banerjee: Age hardening behaviour of wrought Al-Mg-Sc alloy –Materials and Manufacturing Processes, Vol. 23 (2008), Issue 1, pp. 74-81.
M.S. Kaiser, S. Datta, A. Roychowdhury and M.K. Banerjee: Ageing effect ofternary and quaternary additions on the fracture toughness behaviour of cast Al-Mg alloys –J.IE (I), MM Div., Vol. 88 (2007), October, pp. 3-9.
M.S. Kaiser, S. Datta, A. Roychowdhury and M.K. Banerjee: Effect of scandium on the microstructure and ageing behaviour of cast Al-6Mg alloy Accepted for publication in Materials Characterization.
M.S. Kaiser, S. Datta, A. Roychowdhury and M.K. Banerjee: Effect of scandium additions on the tensile properties of cast Al-6Mg alloys – Accepted for publication in Journal of Materials Engineering and Performance.
S. Majumder, A. Roychowdhury, S. Pal ; Finite element simulation of pelvis during a backward fall (Abstract) Journal of Biomechanics) 2006 vol 39 suppl1
S. Majumder, A. Roychowdhury, S. Pal ; Three-dimensional finite element simulation of pelvic fracture during side impact with pelvic-femur-soft tissue complex. International journal of Crashworthiness. (Taylor & francis) 2008 Vol 13 (3) 313-329
S. Majumder, A. Roychowdhury, S. Pal; Experimental validation of 3D finite element model of pelvis-femur-soft tissue complex under side impact loading; International Journal of Vehicle Safety; Accepted
Majumder, S., Roy Chowdhury, A. and Pal, S Effects of trochanteric soft tissue thickness and hip impact velocity on hip fracture in sideways fall through 3D finite element simulations, Journal of Bimechanics (2008) vol 41 no 13 pp 2834-2842
S. Sarkar A. Roychowdhury ; Finite element simulation of head during a frontal impact Journal of Biomechanics 2006 vol 39 suppl1
Sahoo A,., Ghosh A. Roy Chowdhury A., (2008) Optimum angle of screw for fixing plate of fractured Femur . Indian Journal of Biomechanics (India),Vol 2, 24-29.
Roy Tarapada Roy Chowdhury A., (2008) Fatigue analysis of implanted dental screw using. Indian Journal of Biomechanics (India),Vol 1, .30- 36
Majumder, S., Roy Chowdhury, A. and Pal, S Experimental Validation of 3D Finite Element Model of Pelvis-Femur-Soft Tissue Complex under Side Impact Loading International Journal on vehicle Safety (Accepted)
P.Lenka, R. Daripa, R. Kumar, A. Roy Choudhury , D.N. Tibarewala., Stress Analysis of BK Prosthesis with Finite Element Method,. Indian Journal of Biomechanics, June 2007:Vol.1, No.1, pp 75-82.
Prasanna K Lenka, Amit R Chowdhury, Ratnesh K. Design & Development of Lower Extremity Paediatric Prosthesis, a Requirement in Developing Countries. Journal of Physical Medicine & Rehabilitation 2008 (April); 19(1): 8-12.
S. Sarkar, A. Roychowdhury, ; Experimental validation of 3D finite element model of Human skull brain complex under impact loading; International Journal of Vehicle Safety; (Accepted).
U.B Ghosh, D. Sengupta, A. Roychowdhury and S. Pal Biomechanical Analysis of CT-Scan based Custom made Hip Prosthesis with an Optimal Hip Ball Using FEA, Journal of long term effects of Medical Implants.19(1): 31-41 (2009)) .
A .Roychowdhury, S. Saha Application of FEM in orthopadeic implant design Journal of long term effects of Medical Implants. Vol 19(1) 55-83(2009)
Amit Roychowdhury , W. Hayes, Subrata Saha Proposed Frequencies of a Vibrator Used for Implant retrieval at the time of Hip Joint Revision Surgery. Journal of long term effects of Medical Implants.19(2): 157–165 (2009)) .
Ajay Kashi, Amit Roychowdhury, Subrata Saha Finite Element Analysis of a TMJ Implant Journal Of Dental Research Vol 89 (3) 241-247,201
Nityananda Nandi, Sekhar Chandra Dutta, Amit Roychowdhury, Explanation of seismic failure possibilities through dynamic and response analysis of earthen dams. Journal Of Dam Engineering (Accepted).
Amit Roychowdhury Ajay Kashi, , Subrata Saha Patient specific optimization of TMJ Implant Journal Of biomechanics Vol 44(3) 241-247,201
Maji, P., RoyChowdhury, A., Datta, D., 2012. Investigating the morphology of the proximal femur of the Indian population towards designing more suitable THR implants. Journal of long term effects of medical implants. 22(10.1615), 49-64.
Biswas, J., Karmakar, S.K., Majumder, S., Banerjee, P.S., Saha, S., RoyChowdhury, A., (Accepted in Sept 19, 2012). Optimization of spinal implant screw for lower vertebra through finite element studies. Journal of long term effects of medical implants.
Banerjee, P.P., Karmakar, S., RoyChowdhury, A. Biomechanical remedies for degeneration of cervical spine – a review of literature.Journal of medical imaging & health Informatics. (Accepted, going to in December issue)
Banerjee, P.P., Karmakar, S., RoyChowdhury, A., 2012. Measurement and Analysis of Morphological data of Cervical Spine for Indian population Journal of Medical & Allied Sciences.Vol(2), Issue-2, PP 66-76.
Biswas, J.K., Karmakar, S.K., Majumder, S., Roychowdhury, A., 2012. A finite element study of spinal implant (pedicle screw) design for lumber (L3 - L5) vertebra. Indian journal of biomechanics 3(1-2), 50-60.
Biswas, J.K., Karmakar, S.K., Majumder, S., Banerjee, P.S., Saha S., Roychowdhury, A. Optimization of Spinal implant screw for lower vertebra through finite element study. Accepted (2012): Journal of long-term effects of medical implants.
Sandipan Roy, Debojyoti Panda , Arunava Deb, Sauradeep Bhowmick, Niloy Khutia, Amit RoyChowdhury -Optimization of Effective Modulus and stress concentration for different Pore geometries of Titanium Materials, , The journal of Biomechanics.
J. K. Biswas, S. Karmakar, S. Majumdar, P. S. Banerjee, S Saha, A. Roychoudhury - Optimization of spinal screw for lower vertebra through finite element studies. Journal of Long Term Effects of Medical Implants, vol. 23, 2013, ( in press).
Member Since : 14th August, 2016 | Profile Last Updated On : 16th August, 2016 12:17 AM
« News Update »
All members are requested to attend all the meetings for discussion of the society proceedings. Please keep watching this page for notification.
In this section we will be displaying all our upcoming news and event updates from our society intermittently so stay tuned and keep watching this space.
Thanks for showing your interest. Our blog represents community based thinking on Systems Biology and Translational Resaerch. We constantly encourage new thoughts and that is the sole reason that we have created this process for the community.
Send a Mail to firstname.lastname@example.org
The subject of your email should be the title of your post
The body of your mail should be your post in whatever formatting you prefer. But we will advise to keep it simple and plain for maximum readbility/
You should mention the following details at the bottom of your post as depicted below:
Your Firstname Lastname
Your Current Designation | Your Current Organization
Your Email Id | Your Mobile No
Link of your online profile
You can also attach 1 picture if you want but it should be in jpg format not exceeding more then 500kb.
Please note that all submitted posts will be published only if found suitable after a proper review by our web committee. The committee's discrestion in this matter is to be considered as final and non argumentive in all respect.